Struct freya_elements::elements::rect

pub struct rect;

rect is a generic element that acts as a container for other elements.

You can specify things like width, padding or even in what direction the inner elements are stacked.

Example

fn app() -> Element {
    rsx!(
        rect {
            direction: "vertical",
            label { "Hi!" }
            label { "Hi again!"}
        }
    )
}

Implementations

impl rect

pub const padding: AttributeDescription = _

Specify the inner paddings of an element. You can do so by four different ways, just like in CSS.

Example

fn app() -> Element {
    rsx!(
        rect {
            padding: "25", // 25 in all sides
            padding: "100 50", // 100 in top and bottom, and 50 in left and right
            padding: "2 15 25", // 2 in top, 15 in left and right, and 25 in bottom
            padding: "5 7 3 9" // 5 in top, 7 in right, 3 in bottom and 9 in left
        }
    )
}

pub const height: AttributeDescription = _

Specify the width and height for the given element.

See syntax in Size Units.

Example

fn app() -> Element {
    rsx!(
        rect {
            background: "red",
            width: "15",
            height: "50",
        }
    )
}

pub const width: AttributeDescription = _

pub const min_height: AttributeDescription = _

min_width & min_height

rect supports specifying a minimum width and height, this can be useful if you use it alongside a percentage for the target size.

See syntax for Size Units.

Usage

fn app() -> Element {
    rsx!(
        rect {
            background: "red",
            min_width: "100",
            min_height: "100",
            width: "50%",
            height: "50%",
        }
    )
}

pub const min_width: AttributeDescription = _

pub const max_height: AttributeDescription = _

max_width & max_height

rect supports specifying a maximum width and height.

See syntax for Size Units.

Usage

fn app() -> Element {
    rsx!(
        rect {
            background: "red",
            max_width: "50%",
            max_height: "50%",
            width: "500",
            height: "500",
        }
    )
}

pub const max_width: AttributeDescription = _

pub const background: AttributeDescription = _

Specify a color as the background of an element.

You can learn about the syntax of this attribute in Color Syntax.

Example

fn app() -> Element {
    rsx!(
        rect {
            background: "red"
        }
    )
}

pub const border: AttributeDescription = _

border & border_align

You can add a border to an element using the border and border_align attributes.

• border syntax: [width] <solid | none> [color].
• border_align syntax: <inner | outer | center>.

Example

fn app() -> Element {
    rsx!(
        rect {
            border: "2 solid black",
            border_align: "inner"
        }
    )
}

pub const border_align: AttributeDescription = _

pub const direction: AttributeDescription = _

Control how the inner elements stack.

Accepted values:

• vertical (default)
• horizontal

Usage

fn app() -> Element {
    rsx!(
        rect {
            width: "100%",
            height: "100%",
            direction: "vertical",
            rect {
                width: "100%",
                height: "50%",
                background: "red"
            },
            rect {
                width: "100%",
                height: "50%",
                background: "green"
            }
        }
    )
}

pub const shadow: AttributeDescription = _

Draw a shadow of the element.

Syntax: <x> <y> <intensity> <size> <color>

Example

fn app() -> Element {
    rsx!(
        rect {
            shadow: "0 0 25 2 rgb(0, 0, 0, 120)"
        }
    )
}

pub const corner_radius: AttributeDescription = _

corner_radius & corner_smoothing

The corner_radius attribute lets you smooth the corners of the element, with corner_smoothing you can give a “squircle” effect.

Example

fn app() -> Element {
    rsx!(
        rect {
            corner_radius: "10",
            corner_smoothing: "75%"
        }
    )
}

pub const corner_smoothing: AttributeDescription = _

pub const color: AttributeDescription = _

The color attribute lets you specify the color of the text.

You can learn about the syntax of this attribute in Color Syntax.

Example

fn app() -> Element {
    rsx!(
        label {
            color: "green",
            "Hello, World!"
        }
    )
}

Another example showing inheritance:

fn app() -> Element {
    rsx!(
        rect {
            color: "blue",
            label {
                "Hello, World!"
            }
        }
    )
}

pub const font_size: AttributeDescription = _

You can specify the size of the text using font_size.

Example

fn app() -> Element {
    rsx!(
        label {
            font_size: "50",
            "Hellooooo!"
        }
    )
}

pub const font_family: AttributeDescription = _

With the font_family you can specify what font you want to use for the inner text.

Check out the custom font example to see how you can load your own fonts.

Example

fn app() -> Element {
    rsx!(
        label {
            font_family: "Inter",
            "Hello, World!"
        }
    )
}

pub const font_style: AttributeDescription = _

You can choose a style for a text using the font_style attribute.

Accepted values:

• upright (default)
• italic
• oblique

Example

fn app() -> Element {
    rsx!(
        label {
            font_style: "italic",
            "Hello, italic World!"
        }
    )
}

You can also specify multiple fonts in order of priority, if one is not found it will fallback to the next one.

Example:

fn app() -> Element {
    rsx!(
        label {
            font_family: "DoesntExist Font, Impact",
            "Hello, World!"
        }
    )
}

pub const font_weight: AttributeDescription = _

You can choose a weight for text using the font_weight attribute.

Accepted values:

• invisible
• thin
• extra-light
• light
• normal (default)
• medium
• semi-bold
• bold
• extra-bold
• black
• extra-black
• 50
• 100
• 200
• 300
• 400
• 500
• 600
• 700
• 800
• 900
• 950

Example

fn app() -> Element {
    rsx!(
        label {
            font_weight: "bold",
            "Hello, bold World!"
        }
    )
}

pub const font_width: AttributeDescription = _

You can choose a width for a text using the font_width attribute.

⚠️ Only fonts with variable widths will be affected.

Accepted values:

• ultra-condensed
• extra-condensed
• condensed
• normal (default)
• semi-expanded
• expanded
• extra-expanded
• ultra-expanded

Example

fn app() -> Element {
    rsx!(
        label {
            font_width: "ultra-expanded",
            "Hello, wide World!"
        }
    )
}

pub const main_align: AttributeDescription = _

main_align & cross_align

Control how the inner elements are positioned inside the element. You can combine it with the direction attribute to create complex flows.

Accepted values for both attributes are:

• start (default): At the begining of the axis
• center: At the center of the axis
• end: At the end of the axis
• space-between(only for main_align): Distributed among the available space
• space-around (only for main_align): Distributed among the available space with small margins in the sides
• space-between (only for main_align): Distributed among the available space with the same size of margins in the sides and in between the elements.

When using the vertical direction, main_align will be the Y axis and cross_align will be the X axis. But when using the horizontal direction, the main_align will be the X axis and the cross_align will be the Y axis.

Example on how to center the inner elements in both axis:

fn app() -> Element {
    rsx!(
        rect {
            width: "100%",
            height: "100%",
            main_align: "center",
            cross_align: "center",
            rect {
                width: "50%",
                height: "50%",
                background: "red"
            },
        }
    )
}

pub const cross_align: AttributeDescription = _

pub const text_align: AttributeDescription = _

You can change the alignment of the text using the text_align attribute.

Accepted values:

• center
• end
• justify
• left (default)
• right
• start

Example

fn app() -> Element {
    rsx!(
        label {
            text_align: "right",
            "Hello, World!"
        }
    )
}

pub const rotate: AttributeDescription = _

The rotate attribute let’s you rotate an element.

Compatible elements: all except text.

Example

fn app() -> Element {
    rsx!(
        label {
            rotate: "180deg",
            "Hello, World!"
        }
    )
}

pub const overflow: AttributeDescription = _

Specify how overflow should be handled.

Accepted values:

• clip
• none

Example

fn app() -> Element {
    rsx!(
        rect {
            overflow: "clip",
            width: "100",
            height: "100%",
            rect {
                width: "500",
                height: "100%",
                background: "red",
            }
        }
    )
}

pub const margin: AttributeDescription = _

Specify the margin of an element. You can do so by four different ways, just like in CSS.

Example

fn app() -> Element {
    rsx!(
        rect {
            margin: "25", // 25 in all sides
            margin: "100 50", // 100 in top and bottom, and 50 in left and right
            margin: "2 15 25", // 2 in top, 15 in left and right, and 25 in bottom
            margin: "5 7 3 9" // 5 in top, 7 in right, 3 in bottom and 9 in left
        }
    )
}

pub const position: AttributeDescription = _

Specify how you want the element to be positioned inside it’s parent area.

Accepted values:

• stacked (default)
• absolute

When using the absolute mode, you can also combine it with the following attributes:

• position_top
• position_right
• position_bottom
• position_left

These only support pixels.

Example

fn app() -> Element {
    rsx!(
        rect {
            width: "100%",
            height: "100%",
            rect {
                position: "absolute",
                position_bottom: "15",
                position_right: "15",
                background: "black",
                width: "100",
                height: "100",
            }
        }
    )
}

pub const position_top: AttributeDescription = _

pub const position_right: AttributeDescription = _

pub const position_bottom: AttributeDescription = _

pub const position_left: AttributeDescription = _

pub const opacity: AttributeDescription = _

Specify the opacity of an element and all its descendants.

Example

fn app() -> Element {
    rsx!(
        rect {
            opacity: "0.5", // 50% visible
            label {
                "I am fading!"
            }
        }
    )
}

pub const content: AttributeDescription = _

Specify how you want the automatic (e.g width: auto) bounds in the cross axis to be constrained for the inner elements.

Accepted values:

• normal (default): Uses parent bounds.
• fit: Uses parent bounds but later shrunks to the size of the biggest element inside.

The fit mode will allow the inner elements using width: fill-min to expand to the biggest element inside this element.

Example

fn app() -> Element {
    rsx!(
        rect {
            content: "fit",
            height: "100%",
            rect {
                width: "fill-min", // Will have a width of 300px
                height: "25%",
                background: "red",
            }
            rect {
                width: "150",  // Will have a width of 150px
                height: "25%",
                background: "green",
            }
            rect {
                width: "fill-min",  // Will have a width of 300px
                height: "25%",
                background: "blue",
            }
            rect {
                width: "300",  // Biggest element, will have a width of 300px
                height: "25%",
                background: "black",
            }
        }
    )
}

pub const line_height: AttributeDescription = _

line_height

Specify the height of the lines of the text.

Example

fn app() -> Element {
    rsx!(
        label {
            line_height: "3",
            "Hello, World! \n Hello, again!"
        }
    )
}

pub const spacing: AttributeDescription = _

Specify a space between the inner elements. Think it as a margin for every element but defined by its parent. It only applies to the side of the direction.

Example

fn app() -> Element {
    rsx!(
        rect {
            direction: "vertical",
            spacing: "20",
            // Not before
            rect {
                width: "100",
                height: "100",
                background: "red",
            }
            // There will be a space between these two elements of 20 pixels
            rect {
                width: "100",
                height: "100",
                background: "blue",
            }
            // Here as well
            rect {
                width: "100",
                height: "100",
                background: "green",
            }
            // But not after
        }
    )
}

pub const name: AttributeDescription = _

pub const focusable: AttributeDescription = _

pub const role: AttributeDescription = _

pub const focus_id: AttributeDescription = _

pub const alt: AttributeDescription = _

pub const canvas_reference: AttributeDescription = _

pub const layer: AttributeDescription = _

pub const offset_y: AttributeDescription = _

pub const offset_x: AttributeDescription = _

pub const reference: AttributeDescription = _

pub const cursor_reference: AttributeDescription = _